When you have a site as well as an web app, pace is very important. The swifter your website performs and the faster your web apps perform, the better for everyone. Considering that a web site is simply an array of data files that interact with each other, the systems that store and work with these data files have a vital role in site overall performance.

Hard disk drives, or HDDs, were, right up until the past few years, the more effective products for storing information. Nonetheless, in recent times solid–state drives, or SSDs, have been gaining popularity. Take a look at our comparability chart to check out if HDDs or SSDs are more suitable for you.

1. Access Time

Image

After the launch of SSD drives, data accessibility rates have gone through the roof. Because of the completely new electronic interfaces made use of in SSD drives, the typical data access time has shrunk towards a all–time low of 0.1millisecond.

Image

HDD drives count on rotating disks for files storage reasons. Each time a file is being accessed, you will need to await the correct disk to reach the appropriate position for the laser to view the data file in question. This leads to a typical access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Caused by the new revolutionary data file storage method embraced by SSDs, they provide better data access speeds and faster random I/O performance.

Throughout Triad Hosting Services’s tests, all SSDs confirmed their ability to deal with no less than 6000 IO’s per second.

Image

Hard drives provide slower data access rates due to aging file storage space and access technique they’re employing. In addition, they exhibit considerably slower random I/O performance in comparison with SSD drives.

During our tests, HDD drives handled an average of 400 IO operations per second.

3. Reliability

Image

The lack of moving parts and rotating disks in SSD drives, and also the recent improvements in electric interface technology have generated a significantly safer file storage device, having an common failure rate of 0.5%.

Image

As we have already noted, HDD drives rely on spinning disks. And anything that utilizes a great number of moving components for extented time frames is at risk of failing.

HDD drives’ common rate of failing ranges somewhere between 2% and 5%.

4. Energy Conservation

Image

SSD drives are usually smaller compared to HDD drives and they lack any kind of moving elements whatsoever. Consequently they don’t make as much heat and need less power to function and fewer energy for chilling purposes.

SSDs use up between 2 and 5 watts.

Image

HDD drives are famous for staying noisy. They need far more power for air conditioning purposes. On a hosting server which has a large number of HDDs running at all times, you’ll need a good deal of fans to make sure they’re cool – this will make them a lot less energy–efficient than SSD drives.

HDDs consume in between 6 and 15 watts.

5. CPU Power

Image

Because of SSD drives’ greater I/O performance, the key web server CPU will be able to process data file calls more rapidly and save time for additional procedures.

The standard I/O delay for SSD drives is 1%.

Image

When you use an HDD, you’ll have to devote additional time awaiting the outcome of your data ask. Because of this the CPU will stay idle for extra time, waiting around for the HDD to respond.

The average I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

In the real world, SSDs perform as wonderfully as they performed during our checks. We produced an entire system back up on one of our own production machines. All through the backup process, the regular service time for I/O demands was below 20 ms.

Image

Throughout the identical lab tests sticking with the same server, this time around equipped out using HDDs, overall performance was noticeably reduced. Throughout the hosting server backup procedure, the standard service time for any I/O demands ranged between 400 and 500 ms.

7. Backup Rates

Image

Discussing back–ups and SSDs – we have witnessed a significant progress with the data backup rate as we turned to SSDs. Currently, a typical hosting server backup takes simply 6 hours.

Image

Over the years, we have utilized principally HDD drives with our machines and we’re well aware of their general performance. With a hosting server pre–loaded with HDD drives, a complete web server backup typically takes around 20 to 24 hours.

Our Linux cloud hosting accounts offer SSD drives automatically. Join our Triad Hosting Services family, and see how we could help you boost your web site.


  • Service guarantees

  •  
  • Subscribe today. There aren’t any installation service fees and you’ll have complete root/administrator access to the server. 99.9% network uptime is guaranteed.
  • Compare our prices

  •  
  • Review the resources and features coming with Triad Hosting Services’s Virtual Private Servers. You can begin with a cheaper VPS Hosting configuration and move up with only a click as your necessities grow.
  • Compare our hosting plans
  • Contact Us

  •  
  • Our representatives are on duty for you around the clock to resolve any questions in relation to our VPS Hosting services. 1–hour reply–back time warranty.